EnglishFrenchPortugueseSpanish
EnglishFrenchPortugueseSpanish

Beta95X V3 Whoop Quadcopter (Analog) PNP

Rating
4.5/5

Beta95X V3 Whoop Quadcopter – PNP

185.00 

In stock

In stock

Beta95X V3 Whoop Quadcopter (Analog) PNP

Rating
4.5/5

Beta95X V3 Whoop Quadcopter – PNP

185.00 

In stock

In stock

Description

Please Note:

1. DO NOT pull the power connector violently, as this may cause the capacitor of the flight controller to contact the carbon fiber on the frame and cause a short circuit.

2. Due to the shortage of STM32F105 ESC Chip, we switched to AT32F415 ESC Chip for the Beta95X V3 quadcopter.

We are glad to announce that the Beta95X V3 series drone is updated with huge improvements. The new changes could effectively reduce the issue of jello generated in the insane flight and provide a better FPV image.
  • Change the motor to 1404 4500KV Motor, which can effectively reduce the vibration of the fuselage during the flight.
  • Replace the D63 5-blade propellers with D63 3-Blade Props, which will have lower noise and less vibration during flight.
As the updated version of Beta95X V2, Beta95X V3 Whoop Quadcopter has a brand new pusher design and more powerful configuration, bringing pilots a smoother flying experience! What’s more, with the built-in mount for the SMO 4K and a low center of gravity “pusher-style” inverted frame, Beta95X V3 Whoop Quadcopter perfectly matches for SMO 4K camera, and gives the pilots an incredibly stable and clear 4K footage video while in the FPV flight!

Bullet Point

  • Beta95X V3 is perfectly suitable for the SMO 4K action camera. It’s very convenient for out-of-the-box installation and power input for the camera with a built-in camera mount and a power cable. Combining with SMO 4K, pilots can get a stable & high-quality video while in FPV flight.
  • Adopts a brand-new innovative pusher frame design, the frame is made of PA12 material, which has high abrasion resistance and can dampen noise & vibrations, bringing the drone a more durable flight and no fear of damage. The frame also comes with an EVA foam cushioning design to give you more safety flying.
  • Equipped with Toothpick F405 AIO 20A FC V4, 1404 4500KV motor, and D63 3-blade props, this highly efficient power system keeps Beta95X V3 more powerful and less noise in flight. For battery, we highly recommend you using the BETAFPV 450mAh 4S battery to get the best flying experience.
  • Centering the drone’s gravity by reversed-motor design and top battery place makes the drone more maneuverable to achieve all FPV freestyle tricks such as diving.
  • Further improves the shock mitigation system to eliminate the shake of the camera, Beta95X V3 will make the camera more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with the stabilized and clear video.

Specification

  • Item: Beta95X V3 Whoop Quadcopter
  • Weight: 99.1g (without battery)
  • Wheelbase: 95mm
  • FC: Toothpick F405 AIO 20A FC V4
  • Frame: Beta95X V3 Frame Kit
  • Motors: 1404 4500KV Brushless motor
  • Props: Gemfan D63 3-Blades Props
  • Receiver Option: Frsky FCC/Frsky LBT/TBS/PNP
  • Camera: Caddx Ant Customized Camera (4:3)
  • FPV Camera Degree: 25°- 45°
  • VTX: M02 25-350mW 5.8G VTX
  • Camera Mount: SMO 4K camera Mount
  • HD Camera Mount Degree: 5°- 45°
  • Antenna: Air 5.8GHz Antenna (RHCP)
  • Battery: 450mAh 4S battery(Not including)
  • Charge Connector: XT30
  • Flight time: About 4.5 min flight with 450mAh 4S battery

 

Beta95X V3 Pusher Frame

A newly designed pusher whoop frame – Beta95X V3 Frame is made of high-quality PA12 material, which can dampen noise and vibrations and have high abrasion resistance, bringing the drone a more durable flight and no fear of damage. Meanwhile, it also comes with an EVA foam cushioning design to give you more safety flying.  The pusher style puts all the cameras and batteries on the top of the platform, makes the center of gravity is right in the middle of the drone, brings the best fly operability.

Camera & VTX

A customized Ant micro analog FPV camera is also provided on Beta95X V3 Whoop Quadcopter, which brings high-quality video and low RF interference. In addition, M02 25-350mW VTX is a high-quality 5.8GHz VTX including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun.

FC & ESC

Beta95X V3 series whoop drone is equipped with the newly released Toothpick F405 AIO 20A FC V4, it extremely reduces the weight while improving the ability of the ESC to continuous current 20A, and brings pilots more power to fly the Beta95X V3 quad! Meanwhile, the new 20A FC V4 adds 2 pin connector ports for DJI Digital VTX and Rx, just plug & play, less solder work needed, super easy to install.

Please Note: The chip of the F405 V4 flight controller’s ESC has changed to AT32F415 from STM32F105 due to shortage. While the AT32F415 is applicable to the ESC firmware version BETAFPV_20A_AT32.

Motor & Props

Gemfan D63 3-Blades Props is designed for inverted installation, and it brings pilots a smooth flight! It is more durable and more powerful, offers pilots a high-efficiency flight experience. Equipped with the 1404 4500KV Brushless motor, it brings a stronger power and lower noise, which will give pilots an unprecedented flying experience.

The Beta95X V3 Whoop Quadcopter also comes with “props out” by default. Why do we need “Props out” direction?

Default Betaflight props direction, quadcopter dips, and “washes out” in hard corners. With reversed props or “props out”, no more dipping even in the hardest cornering.

 

FAQ

1. Cli Dump of Beta95X V3 Whoop Quadcopter (Click here to find the details).

2. STL File for the Base of Naked Camera for Beta95X V3 Pusher Drone Series (Click here to find the details.)

3. How to power the Naked Camera on Beta95X V3 or Beta95X V3 HD Digital VTX.

One adapter 3P GH1.25 power cable for Customized Naked Camera is offered in the package, pilots can use it to power the Naked Camera.

4. How to Connect the External Rx to Toothpick F405 20A AIO FC V4 (Click here to find the details).

Package

  • 1 * Beta95X V3 Whoop Quadcopter
  • 1 * Gemfan D63 3-blades Propellers(2CW+2CCW)
  • 1 * 20mm FPV Camera Mount
  • 1 * Spare EVA Foam Tape
  • 1 * USB Adapter Board for FC
  • 1 * Adapter Cable for Customized Naked Camera

Batteries and SMO 4K Camera are not included in the package. 

Additional information

Brand

Reviews

There are no reviews yet.

Be the first to review “Beta95X V3 Whoop Quadcopter (Analog) PNP”

Your email address will not be published. Required fields are marked *

Abrir Chat
1
Text us!
My FPV Support
Hello! Can we help you?