EnglishFrenchPortugueseSpanish
EnglishFrenchPortugueseSpanish

Iflight Chimera 7 6s – Analog System

Rating
4.5/5
iFlight Chimera7 7″ 6S 1300KV LR Freestyle Quadcopter w/ Caddx Ratel FPV Camera – With TBS Crossfire Nano RX

370.00 400.00 

Sold out! Text us to re-order this product

Clear

Iflight Chimera 7 6s – Analog System

Rating
4.5/5
iFlight Chimera7 7″ 6S 1300KV LR Freestyle Quadcopter w/ Caddx Ratel FPV Camera – With TBS Crossfire Nano RX

370.00 400.00 

Sold out! Text us to re-order this product

Clear

Description

Introducing what has been requested for too long already! The Iflight Chimera7 - BNF, a super efficient 7" Long-Range quad that can go where you couldn't go before and can carry bigger batteries to get a super flight time ! With its super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control, lipo or lion pack can both be used.

Video

HIGHLIGHTS:

– 6mm rigid arm design for more stiffness

– Top- and bottom battery mount option

– XING 2806.5 efficient wide stator motors

– M8Q-5883-GPS Module V2.0 pre-installed for more safety at distance

– 800mW high power adjustable VTX

– GoPro TPU bottom stand (GoPro protector not included)

– 360° TPU protection, FPV cam protection and antenna mounts

– Battery voltage LED status light (illuminated IF logo on the bottom)

Specifications

FRAME //: Chimera7

– Wheelbase: 320mm

– Main body dimension: 258*199mm

– Bottom to top distance: 20mm

– Arm thickness: 6mm

– Bottom plate thickness: 3mm

– Top plate thickness: 2mm

– Upper(middle) plate thickness: 3mm

– Camera plate thickness: 3mm (included TPU inserts)

ELECTRONICS // SucceX-D F7 V2.1 Stack (50A 4-in-1 ESC):

SucceX-D F7 V2.1 TwinG

– MCU: 216MHz STM32F722

– Gyro:2x ICM20689

– Baro: YES

– Blackbox:32MB

– Betaflight OSD: YES

– BEC: 5V 2.5A / 9V 2.5A

– Current sensor scale:  100

– Inverter for SBUS input (UART2-RX)

– Smartaudio & Tramp VTX protocol supported

– Beeper pad : Yes

– RSSI input pad: No

– UARTs:5

– Motor outputs: 8

– 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

– BLHeli32 Telemetry:RX5

– Input voltage:recommended 2-6S, MAX 8S

– Firmware Target:   IFLIGHT_F722_TWING

– Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm

– Dimensions:   36*36mm

– Weight: 7.5g

– USB type-C

ESC // SucceX 50A

– MCU: STM32F051

– Up tp 48kHz PWM frequency

– Capacitance: 470uF/50V

– Current Sensor: Yes

– Input: 2-6S LIPO

– Constant: 50A / Burst: 60A

– BlHeli32 telemetry: Yes

– BEC: No

– Supports up to Dshot1200, Proshot, Oneshot, Multishot

– Target: iFlight-BL32-4IN1

– Weight: 14.4g

– Mounting pattern: 30.5*30.5mm/Φ3mm

– Dimensions: 43*39mm (including the power pads)

VTX// SucceX Force 5.8GHz 800mW VTX Adjustable

– Item: SucceX-Force 800mW adjustable VTX

– Input voltage: 7-36V

– Output voltage/ Max current: 5V 1A

– 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW,250mA@400mW, 380mA@800mW

– Channel: 40

– size:36*36*3mm

– PIT/25mW/100mW/400mW/800mW

BNF // Parts list (Build)

Prebuilt and indoor tested Quadcopter

– 1x Chimera7 frame

– 1x GoPro TPU bottom stand incl. lock screw

– 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19

– 1x Albatross RHCP SMA 5.8GHz 150mm antenna

– 2 sets x Gemfan tri-blade 7040 props (Set of 4 – Color may vary)

– 4x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Additional information

Brand

Motors

1300kv, 1800kv

Receiver

PNP, XM+, TBS Crossfire

Reviews

There are no reviews yet.

Be the first to review “Iflight Chimera 7 6s – Analog System”

Your email address will not be published. Required fields are marked *

Abrir Chat
1
Text us!
My FPV Support
Hello! Can we help you?