(TBS) iFlight Protek25 – 4s HD


The iFlight Protek25 HD CineWhoop is now equipped with the Nebula Nano V2 Digital HD System! The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!


Temporarily out of stock ↓


The iFlight Protek25 HD CineWhoop is now equipped with the Nebula Nano V2 Digital HD System! After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continues to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with the popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.

Thie whoop features durable plastic protectors with copper standoffs, portable compact design, easily accessible USB port without disassembly, LED battery status, lost model buzzer, and a universal GoPro TPU for a full size or naked GoPro.

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek25 HD is equipped with XING 1404 5500KV Motors. It also features the Vista/Nebula Nano V2 System, SucceX-D 20A F4 Whoop AIO, and the Nazgul 2525 propellers.


Note: Battery, GoPro, and GoPro mount NOT included




  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • UPGRADE DPROP GUARDS V2.0 (Material optimized)
  • Pre-tuned with smooth freestyle settings
  • Butter smooth XING 1404 5500KV (4S)
  • Caddx Vista Digital HD System
  • No Props or frame in view!
  • Angle-Mode/Acro-Mode

Pre-Tuned & Pre- Setup

  • Don’t worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • To restore lost tunes or updates, please check out this  linked article: “Firmware/Factory Dumps
  • Please check out this linked article on “How to disable Angle-Mode, activate Acro-Mode


  • FC pattern: 25.5*25.5mm / 20*20mmmmFPV cam spacing: 20mm
  • Top and bottom plate spacing: 24mm (aluminum standoff height)
  • Camera: Caddx Nebula Nano V2
  • Weight: 194.3g (without battery)
  • Bottom plate thickness: 3mm
  • Receiver: PNP (No receiver)
  • SucceX-D 20A Whoop AIO
  • Motor: XING 1404 5500KV
  • Top plate thickness: 2mm
  • Body Size: 91*68.7mm
  • Propeller size: 2.5 inch
  • Wheelbase: 114mm

FC // SucceX-D 20A F4 Whoop AIO

  • Mounting pattern:25.5*25.5mm/φ3mm
  • Constant current:20A,25A(Burst)
  • Target:IFLIGHT_F411_PRO
  • ESC Firmware:G-H-30 BLS
  • BEC output:5V 2A/10V 2A
  • INA pad:UART2 (nR2)
  • Connector:Micro-USB
  • Current sensor:yes
  • Size:30.5*30.5mm
  • ESC Telemetry:no
  • MCU:STM32F411
  • BLHeli:BLHeli-S
  • Gyro:MPU6000
  • Blackbox:8MB
  • Barometer:no
  • Input:2-4S


  • 1x iFlight Protek25 2.5″ 4S HD CineWhoop BNF w/ Caddx Vista + Nebula Nano (Pre-built and tested)
  • 1x Naked GoPro TPU bottom stand black (Naked GoPro Protector not included)
  • 2x Nazgul 2525 propeller (Set of 4 – Color May Vary)
  • 2x iFlight Lipo Strap 15*200mm (Color May Vary)
  • 1x Albatross LHCP RP-SMA 5.8g antenna

Additional information



PNP, XM+, TBS Crossfire


There are no reviews yet.

Be the first to review “(TBS) iFlight Protek25 – 4s HD”

Your email address will not be published. Required fields are marked *