EnglishFrenchPortugueseSpanish
EnglishFrenchPortugueseSpanish

iFlight Protek35 3.5″ 4S CineWhoop Analogue

Rating
4.5/5

The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

252.50 

Sold out! Text us to re-order this product

Sold out! Text us to re-order this product

Description

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2203.5 3600KV Motors. It also features the Caddx Turbo EOS2 V2 FPV Camera, Beast F7 AIO, 45A 2-6S ESC, 5.8GHz SucceX Micro 300mW VTX,  Nazgul 3535 propellers, and more!

Note: Battery, GoPro, and GoPro mount NOT included

Features

  • No Props or frame in view!
  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
  • Butter smooth 2203.5 3600KV (4S)
  • Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

  • Don’t worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check out this  linked article: “Firmware/Factory Dumps
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • Please check out this linked article on “How to disable Angle-Mode, activate Acro-Mode

Specifications

  • Board Beast Whoop F7 AIO 45A /li>
  • Motor: XING 2203.5 3600KV (4S)
  • Wheelbase: 151mm
  • Body Size: 118*94.5mmmm
  • Bottom plate thickness: 3.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • Propeller size: 3.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 305g (without battery)

FC // Beast F7 AIO 

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

ESC // 45A 2-6S

  • Uarts: 5
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

VTX// 5.8GHz SucceX Micro 300mW VTX

  • Power: PIT/25/100/200mW/300mW
  • Antenna interface: IPEX (UFL)
  • VTX protocol: IRC Tramp
  • Size: 13.5×14.5mm
  • Weight: 1.4g

Size Extender (stackable adapter)

  • Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g
  • Whoop VTX size: 16mm/25mm, 2mm hole, total weight (incl. VTX): 2.9g

Recommended Parts (Not Included)

  • Fullsend 4S 95C 1300mAh

Includes

  • Pre-built and tested Quadcopter
  • 1 x ProTek35 Frame
  • 1 x Caddx.us Turbo Eos V2 FPVCam
  • 2 x TPU camera side plate soft mount
  • 2 x Nazgul 3535 propeller (Set of 4 – Color May Vary)
  • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
  • 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
  • 1 x GoPro TPU bottom stand black (GoPro Protector not included)

Additional information

Brand

Reviews

There are no reviews yet.

Be the first to review “iFlight Protek35 3.5″ 4S CineWhoop Analogue”

Your email address will not be published. Required fields are marked *

Abrir Chat
1
Text us!
My FPV Support
Hello! Can we help you?