EnglishFrenchPortugueseSpanish
EnglishFrenchPortugueseSpanish

iFlight Protek35 – Analog System

Rating
4.5/5

The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

252.00 282.00 

In stock

Clear

iFlight Protek35 – Analog System

Rating
4.5/5

The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

252.00 282.00 

In stock

Clear

Description

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2203.5 3600KV Motors. It also features the Caddx Turbo EOS2 V2 FPV Camera, Beast F7 AIO, 45A 2-6S ESC, 5.8GHz SucceX Micro 300mW VTX,  Nazgul 3535 propellers, and more!

Note: Battery, GoPro, and GoPro mount NOT included

Features

  • No Props or frame in view!
  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
  • Butter smooth 2203.5 3600KV (6S)
  • Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

  • Don’t worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check out this  linked article: “Firmware/Factory Dumps
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • Please check out this linked article on “How to disable Angle-Mode, activate Acro-Mode

Specifications

  • Board Beast Whoop F7 AIO 45A /li>
  • Motor: XING 2203.5 3600KV (6S)
  • Wheelbase: 151mm
  • Body Size: 118*94.5mmmm
  • Bottom plate thickness: 3.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • Propeller size: 3.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 305g (without battery)

FC // Beast F7 AIO 

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

ESC // 45A 2-6S

  • Uarts: 5
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

VTX// 5.8GHz SucceX Micro 300mW VTX

  • Power: PIT/25/100/200mW/300mW
  • Antenna interface: IPEX (UFL)
  • VTX protocol: IRC Tramp
  • Size: 13.5×14.5mm
  • Weight: 1.4g

Size Extender (stackable adapter)

  • Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g
  • Whoop VTX size: 16mm/25mm, 2mm hole, total weight (incl. VTX): 2.9

Includes

  • Pre-built and tested Quadcopter
  • 1 x ProTek35 Frame
  • 1 x Caddx.us Turbo Eos V2 FPVCam
  • 2 x TPU camera side plate soft mount
  • 2 x Nazgul 3535 propeller (Set of 4 – Color May Vary)
  • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
  • 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
  • 1 x GoPro TPU bottom stand black (GoPro Protector not included)

Additional information

Brand

Power version

4s, 6s

Receiver

PNP, XM+, TBS Crossfire

Reviews

There are no reviews yet.

Be the first to review “iFlight Protek35 – Analog System”

Your email address will not be published. Required fields are marked *

Abrir Chat
1
Text us!
My FPV Support
Hello! Can we help you?