Description
Toolkit M6 Features
- Battery Charger
- Cell Checker
- Servo Tester
- PWM,PPM, S.Bus Input/output & Receiver tester
- Viable AMP/Volt DC Power supply (Requires external DC input)
Charger Features
- Lithium battery cut-off voltage can be set (TVC function)
- Measure battery voltage, internal resistance, balance
- Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
- Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
- The customizable 1-28V constant output voltage, 1-10A constant output current
- Multi-language optional
- USB 2.1A@5.0V Output (Mobile device charging)
- U-disk firmware upgrade (Slave device)
Charger
- Input voltage: 7.0-28V
- Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
- Charge power: 150W / Up to 10A
- Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
- USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
- Dimensions: 68x49x26mm
- Weight: 80g
- LCD: 1.8inch TFT RGB, 160×128 Pixel
Measurement
- PWM: 880-2200us @ 20-400Hz
- PPM: 880-2200us*8CH @ 20-50Hz
- SBUS: 880-2200us*16CH @ 20-100Hz
- Voltage: 1.0-5.0V @ 1-6S
- IR: 10-99mR @ 1-6S
Output
- PWM: 500-2500us @ 20-1000Hz
- PPM: 880-2200us*8CH @ 50Hz
- SBUS: 880-2200us*16CH @ 74Hz
- Power: 1-10A @ 1-28V Mode:CC+CV
Power supply:
Features
- Safe case design (no bare metal or wire terminals)
- Over Current Protection
- Compact and portable
Specifications
- Model: ADP100
- Input: AC 100-240V 50-60HZ 1.5A
- Model: ADP100
- Input voltage: AC 100-240V 50/60Hz
- Input current: MAX 1A
- Output voltage: MAX 20.0V
- Output current: MAX 5.0A
- Connector: XT60
- Size: 90mm * 90mm * 32mm
- Wight: 215g
- Work temp:-10 – 40’C
- Main Plug: EU/UK/AU/US
Includes
- 1 x ToolkitRC ADP100 Power Supply
- 1 x Cable
Reviews
There are no reviews yet.